//Google Analytics

Saturday, October 27, 2012

DIY: Building a Medieval Helmet Out of Cardboard


For this post, I technically have my first guest blogger! My husband, Brian! He’s recently been making props and helmets out of cardboard and hot glue and he’s been having a lot of fun in the process. I told him he needed to do a tutorial for the blog and he agreed! Without further ado…

Hey everyone, my name is Brian and I’m Catherine’s husband. Some friends and I have recently started a film company called Visionwood Productions. I’ve loved making movies since I could wield a camera and have fortunately found a great group of people who are as passionate about it as I am. One of our upcoming projects is a short medieval film and I’ve been working on props and helmets for us to wear. I’ve hard a crazy hard time finding good tutorials online on how to make them so I got a basic idea and just ran with it. My hope is that this blog tutorial will help other people to create awesome props with minimal expense!


You’ll need:
  • Lots of cardboard
  • Box cutter
  • Rotary board or a hard surface to cut on
  • Hot glue gun and lots of glue sticks
  • Flat black spray paint
  • Metallic spray paint (silver, bronze, gold, whichever you prefer)
  • Junk paint brush
  • Paper
  • Pencil
  • Ruler

Step 1: Gather all your materials and have space to work. Helpful hint: Play something awesome like a Coldplay station on Spotify!

Step 2: Cut four 1” wide strips, about a foot and a half in length, but the length doesn’t have to be precise, they just need to be long. Crush the frames so that they are easily bended.



Step 3: Wrap two strips around your head to figure out the size it will need to be. This will be the basic frame of the helmet. Be sure to add a couple inches for extra space. You’ll need this later on. You could also just use a measuring tape first, but this looks more fun! Hot glue the pieces together to create the size you need.



Step 4: Decide where you want the front to be and stick with that. Put one strip long ways around the circle to fit your head. Glue it down. Then put the other strip in the other direction, glue it down and glue the strips to each other where they meet.



Step 5: Fold the edges up and glue them down. Leave the front one alone, because that will be the nose guard piece later.


Step 6: Cut out a circle that’s about 3-4” in diameter. Glue it to the top of the inside of the helmet frame.



Step 7: Cut 4 pieces of cardboard in the shape in the following picture. It’s hard to describe, it’s like a rounded triangle. Use the measurements you see in the picture. The lines on the rotary board are 1”x1”. Crush them and make them pliable. Mush the pieces into the inside of the frame so they touch the frame on all sides and glue them into place. You can cut them in half if it’s too difficult to place them as is. It's not exact and pieces will overlap, but that's fine.






Step 8: Fold a piece of paper in half and cut out the pattern in this picture. This will be your template for the face area of the mask. Then cut out the pattern on cardboard. When you cut out the eye holes, save the pieces and use them for decoration later. Again, make the piece pliable. You have to do the next step before putting on the face mask so just set it aside for a minute. 



Step 9: Cut out two more pieces of cardboard in the shape of the nose piece and glue them over top to reinforce it. Put glue on the sides of the nose piece for extra reinforcement. 



Step 10: Put the face plate on the mask and hot glue it behind the nose piece.



Step 11: With my head size I then cut a piece of cardboard that is 23"x5" inches, this will vary with your head size but the 5 inch height is a good height. Make this piece pliable because this will be the neck guard of the helmet. Put the neck guard in place and then glue it to the face plate leaving the back and sides of it unglued. Put it on and see how it fits.



Step 12: Make five 3 ½" cardboard strips and glue them to the inside of the neck guard gluing them to the top of the helmet at the same time. This holds the two large pieces together.



Step 13: Fold a piece of paper in on itself till it’s about an inch across. Place on mask where shown.


Step 14: Attach the eye cutouts onto the outside of each eye hole.


Step 15: Cut seven ½” x 7” strips and glue them around the outside of the helmet, spaced evenly apart. This part is purely decoration.


Step 16: Cut a glue stick into little pieces and glue them around the helmet as decoration. You could also use brass fasteners but I found this to be easier because it was hard to make a hole through more than one layer of cardboard.


Step 17: Add cardboard and glue dots as you see fit to make it as decorated as you want.



Step 18: Paint the entire helmet with a flat black spray paint. Let it dry completely.  I used the interior/exterior fast dry spray paint from Wal-Mart. We generally try to avoid Wal-Mart but it’s less than $1 there, and making these helmets tends to use a lot.



Step 19: Spray a small amount onto your brush and vigorously brush onto the helmet. Do it in any direction, using more or less where you think it should be. Do this all over the helmet till you’ve achieved the look you want.





Step 20: Enjoy! 

Front

Right side, the left is the same.

Back


All four of the helmets that I have made in the past week.

Helpful Hints:
Contact your local grocery store or Target and ask if you can have the boxes that they throw out each week. It’s free and there’s plenty!

Feel free to alter/expand this design as you feel necessary. Get creative and have fun! These helmets have been a lot of fun to make and I’m excited about using them in the movie we're going to make!

**NOTE: This is an original project. Please do not sell the pattern or created project for profit. It is for personal use only. Thanks!**

Hope you enjoyed this tutorial and I’d love to see what you create! Send us pictures of the helmets you create at CatherinePageWood@gmail.com! Leave a comment if you have any questions! Have fun!

Stay creative,
Brian



69 comments:

  1. That is really cool and easy to make, thanks!

    ReplyDelete
    Replies
    1. Glad you enjoyed it! Check back for more cardboard craft tutorials! There are more in the making!

      Delete
    2. My son has a Medieval co-op class as part of our homeschool. He needed medieval costume for the last class/feast. This was perfect. The most authentic looking I've seen.....and we need cheap to make :)
      Thanks so much. Keep up the great work.

      Delete
    3. These is by far the best helmets I've encounter on the web. It looks authentic, cheap and sturdy. I have two questions. 1, do you make any other armour types? Like gauntlets, greaves, breastplate ect. And 2, what is your sort medieval movie going to be called?

      Delete
    4. Sorry auto-correct, what I meant to say, was what is the name of your medieval film?

      Delete
    5. I've made gauntlets but haven't done a tutorial as of yet but plan to. I think a breastplate would be difficult with cardboard. The movie is still untitled right now and in pre-production. Subscribe to VisionWood Films on YouTube to stay on top of our current work! Thanks for visiting and commenting!

      -Brian

      Delete
  2. Thanks so much! Able to make it in a few hours. Needed to make a helmet for a school project…worked perfectly!

    ReplyDelete
  3. Thank You. Coincidentally, I needed this for a school project too. Thanks so much!

    ReplyDelete
    Replies
    1. You're welcome! I'm happy to hear it helped you! What class and what kind of project was it for?

      Delete
  4. These are great! Thanks so much for posting. I especially like the glue dot rivets!

    ReplyDelete
    Replies
    1. Thank you so much! My husband is so creative! Be sure to check back for more cardboard projects!

      Delete
  5. This is just what we needed for our upcoming VBS!!! Thanks so much.

    ReplyDelete
    Replies
    1. I'm so glad to hear it helped you! What is the VBS theme?

      Delete
  6. ooh ooh ohh!!! So cool! Can't wait to get this done! Doing Kingdom Rock VBS and playing a knight-- perfect!!!!!! Deb

    ReplyDelete
  7. question- when you are measuring the head-- first step- do you add extra so the goes beyond the nose? Should you not measure the head from tip of nose and round, leaving a little extra for movement? Deb

    ReplyDelete
    Replies
    1. Step 3 is where you'll add a couple inches of extra space for your nose and step 4 when you make the nose piece is where you see where it will actually fall on your nose. And fortunately since it's just cardboard, you can always cut it and add more as you need it. Hope this helps! We would love to see a picture of your helmet when it's done!

      Delete
  8. Oh my goodness!!!
    This is soooo freaking amazing !!!
    It looks sooo real.

    ReplyDelete
    Replies
    1. Thanks so much! I appreciate your kind words! :)

      Delete
  9. Haven't painted it yet but it is looking good. Really should add more than 2 inches to accommodate nose. It fits small but that's ok-- only need it for a week. Your key- which you said over and over- was to really bend up and break the cardboard. I used an old cereal box for the final two paper strips on the face. Very excited. Waiting for the paint from the store. :) Deb

    ReplyDelete
    Replies
    1. Yes, it really just depends on your face size/shape but I'm glad it worked out for you!

      Delete
  10. How do I send you a picture? Deb

    ReplyDelete
    Replies
    1. You can e-mail it to me at CatherinePageWood@gmail.com. I'll even post it if you don't mind! :)

      Delete
  11. did you get the picture?

    ReplyDelete
    Replies
    1. I did! It looks awesome! Sorry I hadn't replied yet. I'll try and work on a post for it soon! Thanks so much, it really looks great!

      Delete
  12. we had so much fun at vbs this week and the helmet was a huge hit. Thanks so much for the wonderful directions! Deb

    ReplyDelete
  13. This is like the coolest helmet ever! Not just for Halloween but if you have a kid who loves to play dress up, this will take adventure time to a whole new level, see...I have a little Mike The Knight at home and he would go crazy over this helmet, besides we are planning on going to the Medieval Festival and wow...he will fit right in! Thanks for sharing such a detail tutorial at the Fluster Buster Party! can't wait to see what would you share next week, Lizy your party co host!

    ReplyDelete
    Replies
    1. Thanks! It looks like a lot of steps but he did it in no time! If you end up making one for your little boy, take a picture and send it to me! I'd love to see how it turns out :)

      Delete
  14. They ALL look amazing! I don't think that I would have the patience to complete one, let alone four. Thank you for sharing this amazing project on Fluster's Creative Muster. Now that you found our party I hope that you will continue to join us every Tuesday evening.

    Robin @ Fluster Buster

    ReplyDelete
    Replies
    1. Thank you! My husband is ecstatic with all of these nice comments! I definitely hope to keep linking up with you guys :) Thanks for hosting!

      Delete
  15. OWO this Is a awesome idea, I'll probably give this a try :)

    ReplyDelete
    Replies
    1. Definitely try it! I'd LOVE to see pictures of how it turns out if you try!

      Delete
  16. I made two! Thanks
    http://deannasbluekitchen.blogspot.ca/2013/10/before-and-after.html

    ReplyDelete
    Replies
    1. Wow Deanna they look awesome!! I'm sure your kids will love them!

      Delete
  17. Can I use this in a larp costume?

    ReplyDelete
    Replies
    1. I'm not sure how much protection it would provide but I don't see why not!

      Delete
  18. You are the most awesome helmet maker ever.

    ReplyDelete
  19. Thank you!!! My son's Cub Scout Pack is having a Knights themed Blue and Gold Banquet, and I've been searching all day for ideas on how to make our own cardboard helmet. Your instructions are very easy to follow, and very simple to make. Only thing we're going to tweak is to make the front look like the Skyrm Yngol Helmet. No horns, just an open face (he doesn't like his face being completely enclosed). The glue dots are also a great idea for the rivets. Thanks again!

    ReplyDelete
    Replies
    1. We're so glad it could help!! We'd love to see pictures if you have them! I hope he had an awesome time!

      Delete
  20. Hello, I was wondering, is the base ( helmet part ) of the hat fit for all the styles? Do I just add different bottom parts, or is there different designs? Either way, I'm very thankful, I have a school project soon, and I also would like this for videos. Plan on making it into a dragonborn helm! Thank you soooo much!

    ReplyDelete
    Replies
    1. E-mail is isrivera2019@hightechhigh.org

      Delete
    2. Yes! All of the helmets are based on that main "ring." If you start with that base, you can build as far as your imagination will take you! :) We'd love to see pictures of your finished project if you have them! Gald we could help! Thanks for stopping by!

      (I also e-mailed you the same comment to be sure you received it!)

      Delete
  21. I wonder if it will make Brian happy to know that his tutorials will help a small military community theater out in the middle of Korea! We are learning from this tutorial how to make helmets for our upcoming performance of Spamalot! Thanks!

    ReplyDelete
    Replies
    1. That is awesome!! We're so glad this tutorial has gone so far! :)

      Delete
  22. These helmets are amazing! i made one but alas, i made it too small. Oh well still looks epic! and this 2nd degree burn from the glue gun was only a minor drawback!

    ReplyDelete
    Replies
    1. Keep trying! You'll get it! Hot glue gun burns are just part of the deal, sorry we failed to mention it ;) haha

      Delete
  23. This is awesome!! So glad you posted it!! I am a Sunday School teacher and our lesson coming up is going to be The Whole Armor of God....I made entire outfits for all 15 kids and I am attempting the helmets now!! Wish me luck!!

    ReplyDelete
    Replies
    1. That's amazing! What a great idea! We'd love to see pictures if you have any!

      Delete
  24. Thanks for taking the time to share this idea! We followed your template but used the supplies we had on hand, which were staples and duct tape. :-) My kids wore them to our homeschool group's medieval dress up day.

    ReplyDelete
  25. I have read several online instructions as to how to make a helmet like this. However, none of the suggest adding a circle of cardboard to the top. I hope this can solve my problems with bending the cardboard. Good helmets, by the way.

    ReplyDelete
    Replies
    1. We're glad you've found this tutorial to be so helpful! Thanks so much!

      Delete
  26. This technique also works really well with the thick cardboard from cereal boxes and the like. That cardstock is sturdy and doesn't have the ridge effect that corrugated has. That circle in the top of the helm is the secret to getting all of the pieces to attach properly.

    ReplyDelete
    Replies
    1. See the profile pic for an helmet I created using the same basic Rib-Rim technique Brian discussed. The core of this helm is made from cereal boxes with craft foam heated and stretched over it with some creative paint. :D

      Delete
    2. Great idea! Cereal boxes are easy to come by too. Your helmet looks awesome! Plus, we love that Gandalf is in your profile picture ;)

      Delete
  27. Best tutorial I've found for this type of helmet. I'm trying to create a life size knight (from cardboard) for our church vacation Bible school. Thank you so much!!!

    ReplyDelete
    Replies
    1. You're so welcome! We're glad this tutorial is so helpful for so many! God bless! We'd love to see pictures if you have any!

      Delete
  28. I made 2 helmets, one directly copying the instructions and one viking helmet (minus face and addition of horns). Your idea and plan is very useful, thanks. :)

    ReplyDelete
    Replies
    1. Awesome! So glad it worked for you! Thanks for stopping by! :) We'd love to see a picture of your finished product if you have a chance! CatherinePageWood@gmail.com

      Delete
  29. We are planning to use this for a school project (for a pumpkin!) It looks wonderful. We will likely end up making a few for our 3 little knights to play with at home. Thank you for generously sharing this!

    ReplyDelete
    Replies
    1. Aww that sounds fun! Thanks for visiting and we'd love to see a picture when you're done! CatherinePageWood@gmail.com

      Delete
  30. To make it more fun and if you have more time on your hands you can do a papier mâché afterwards :)

    ReplyDelete
  31. Really good job. Can you make one so the visor can raise?

    ReplyDelete
    Replies
    1. Thanks! You could try brass fasteners or even bolts/nuts/washers to make the hinge! Great idea!

      Delete
  32. just stumbled across this really helpful tutorial ... can I ask how did you the sort of raised "weld lines" type marks on the helmets ? many thanks Simon

    ReplyDelete
  33. This comment has been removed by the author.

    ReplyDelete

Thank you for your comment! I try to reply to all of the comments so be sure to check back if you asked a question. You can also leave your e-mail address in the comment and I'll let you know when I have replied!